NETGEAR UTM5EW-100NAS manual Pptp Server screen settings, 332, Setting Description Pptp Server

ProSecure Unified Threat Management (UTM) Appliance

To enable the PPTP server and configure the PPTP server pool, authentication, and encryption:

1. Select VPN > PPTP Server. The PPTP Server screen displays:

Figure 199.

2.Enter the settings as explained in the following table:

Table 84. PPTP Server screen settings

Setting	Description
PPTP Server
Enable PPTP Server	To enable the PPTP server, select the Enable check box. Complete the
	following fields:
	Start IP Address	Type the first IP address of the address pool.
	End IP Address	Type the last IP address of the address pool. A maximum of
		six contiguous addresses can be part of the pool. (The first
		address of the pool cannot be assigned to a user.)
	User time out	Enter the time-out period in seconds, from 300 to 1800
		seconds. If there is no traffic from a user, the connection is
		disconnected after the specified period.

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

332