NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Monitor System Access and Performance, 463

ProSecure Unified Threat Management (UTM) Appliance

To monitor traffic limits on each of the WAN ports, and for the UTM9S and UTM25S, also on the xDSL (SLOT-1 or SLOT-2) and USB ports:

1.Select Network Config > WAN Metering. On the multiple WAN port models, the WAN Metering tabs display, with the WAN1 Traffic Meter screen (or, for the UTM9S and UTM25S, the WAN1 screen) in view (the following figure shows the WAN1 Traffic Meter screen of the UTM50). On the single WAN port models, the WAN Traffic Meter screen displays.

The Internet Traffic Statistics section in the lower part of the screen displays statistics on Internet traffic through the WAN port. If you have not enabled the traffic meter, these statistics are not available.

Figure 271.

2.Enter the settings as explained in the following table:

Monitor System Access and Performance

463