NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual  To edit an SSL VPN policy, 376

ProSecure Unified Threat Management (UTM) Appliance

Table 97. Add SSL VPN Policy screen settings (continued)

Setting	Description
Apply	IP Network	Service	From the drop-down list, select the service to which the SSL
Policy For	(continued)		VPN policy is applied:
(continued)			• VPN Tunnel. The policy is applied only to a VPN tunnel.
			• Port Forwarding. The policy is applied only to port
			forwarding.
			• All. The policy is applied both to a VPN tunnel and to port
			forwarding.
		Permission	From the drop-down list, select PERMIT or DENY to specify
			whether the policy permits or denies access.
	All	Policy Name	A descriptive name of the SSL VPN policy for identification and
	Addresses		management purposes.
		Port Range /	A port (fill in the Begin field) or a range of ports (fill in the Begin
		Port Number	and End fields) to which the SSL VPN policy is applied. Ports
			can be 0 through 65535. The policy is applied to all TCP and
			UDP traffic that passes on those ports. Leave the fields blank
			to apply the policy to all traffic.
		Service	From the drop-down list, select the service to which the SSL
			VPN policy is applied:
			• VPN Tunnel. The policy is applied only to a VPN tunnel.
			• Port Forwarding. The policy is applied only to port
			forwarding.
			• All. The policy is applied both to a VPN tunnel and to port
			forwarding.
		Permission	From the drop-down list, select PERMIT or DENY to specify
			whether the policy permits or denies access.

4.Click Apply to save your settings. The policy is added to the List of SSL VPN Policies table on the Policies screen. The new policy goes into effect immediately.

Note: If you have configured SSL VPN user policies, ensure that HTTPS remote management is enabled (see Configure Remote Management Access on page 438). If HTTPS remote management is not enabled, all SSL VPN user connections are disabled.

To edit an SSL VPN policy:

1.On the Policies screen (see Figure 223 on page 373), click the Edit button in the Action column for the SSL VPN policy that you want to modify. The Edit SSL VPN Policy screen displays. This screen is identical to the Add SSL VPN Policy screen (see previous screen).

2.Modify the settings as explained in the previous table.

3.Click Apply to save your settings.

Virtual Private Networking Using SSL Connections

376