NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Setup Wizard of 10 Signatures & Engine

ProSecure Unified Threat Management (UTM) Appliance

Setup Wizard Step 9 of 10: Signatures & Engine

Figure 34.

Enter the settings as explained in the following table, and then click Next to go the following screen.

Table 12. Setup Wizard Step 9: Signatures & Engine screen settings

Setting	Description
Update Settings
Update	From the drop-down list, select one of the following options:
	• Never. The pattern and firmware files are never automatically updated.
	• Scan engine and Signatures. The pattern and firmware files are
	automatically updated according to the settings in the Update Frequency
	section onscreen (see explanations later in this table).
Update From	Set the update source server by selecting one of the following radio buttons:
	• Default update server. Files are updated from the default NETGEAR update
	server.
	• Server address. Files are updated from the server that you specify. Enter the
	IP address or host name of the update server in the Server address field.

Use the Setup Wizard to Provision the UTM in Your Network

63