NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual To select one or more categories of applications, 244

ProSecure Unified Threat Management (UTM) Appliance

Table 55. Common settings on the Add or Edit Application Control Profile screen

Setting	Description
All Other Known	Known applications are the applications that you can select in the lower part of the
Applications	screen. Specify whether all known applications that are not included in this profile
	are allowed or blocked. Make a selection from the drop-down list:
	• Allow. All other known applications are allowed. This is the default setting.
	• Drop. All other known applications are blocked. Only the applications that are
	included in this profile are allowed.
All Other Unknown	Unknown applications are the applications that you cannot select in the lower part
Applications	of the screen, that is, they are not included in any categories. Specify whether all
	unknown applications are allowed or blocked. Make a selection from the
	drop-down list:
	• Allow. All other unknown applications are allowed. This is the default setting.
	• Drop. All other unknown applications are blocked. Only the applications that
	are included in this profile are allowed.
Enable SSL	Select this check box to enable decryption of SSL traffic for which the TCP
Decryption	destination port number is the same as the port number that you specify in the Port
	field.
	Port	The destination port number of SSL traffic that should be decrypted.

4.In the lower part of the screen, select the categories of applications and individual applications that you want to include in the profile by using the following methods:

•To select one or more categories of applications:

In the left pane, select one or more categories from the Categories list by clicking the + next to each category. The categories display in the Active Categories and Individual Applications table.

•To select one or more individual applications:

a. In the left pane, select a category from the Categories list by clicking the + next to the category.

b. In the right pane, select applications by clicking the + next to each application. The applications display in the Active Categories and Individual Applications table.

Note: Rules for individual applications take priority over rules for categories of applications.

•To search for an application:

a.In the right pane, click Show All.

b.Type the name of the application (or the first few letters) in the search field.

•To remove one or more categories or applications from the Active Categories and Individual Applications table:

a.Select the check boxes that are associated with the categories or applications, or select all entries in the table by clicking the Select All table button.

b.Click the Remove table button.

Content Filtering and Optimizing Scans

244