NETGEAR STM150EW-100NAS Add VLAN-VLAN Service screen settings, 155, Add Customized Services on

ProSecure Unified Threat Management (UTM) Appliance

Figure 82.

3.Enter the settings as explained in the following table.

Table 29. Add VLAN-VLAN Service screen settings

Setting	Description
Service	The service or application to be covered by this rule. If the service or application
	does not display in the list, you need to define it using the Services screen (see
	Add Customized Services on page 163).
Action	The action for VLAN connections covered by this rule:
	•	BLOCK always
	•	ALLOW always
Source VLAN User	The settings that determine which VLAN users who send traffic are affected by
	this rule. The options are:
	• Any. All computers and devices that are part of the VLAN.
	• Single address. Enter the required address in the Start field to apply the rule
		to a single computer in the VLAN.
	• Address range. Enter the required addresses in the Start and End fields to
		apply the rule to a range of computers in the VLAN.
Destination VLAN User	The settings that determine which VLAN users who receive traffic are affected by
	this rule. The options are:
	• Any. All computers and devices that are part of the VLAN.
	• Single address. Enter the required address in the Start field to apply the rule
		to a single computer in the VLAN.
	• Address range. Enter the required addresses in the Start and End fields to
		apply the rule to a range of computers in the VLAN.

Firewall Protection

155