NETGEAR STM150EW-100NAS Configure Applications for Port Forwarding, Add Servers and Port Numbers

ProSecure Unified Threat Management (UTM) Appliance

Configure Applications for Port Forwarding

Port forwarding provides access to specific defined network services. To define these services, you need to specify the internal server addresses and port numbers for TCP applications that are intercepted by the port-forwarding client on the user’s computer. This client reroutes the traffic to the UTM.

Add Servers and Port Numbers

To configure port forwarding, you need to define the IP addresses of the internal servers and the port number for TCP applications that are available to remote users.

To add a server and a port number:

1.Select VPN > SSL VPN > Port Forwarding. The Port Forwarding screen displays. (The following figure shows an example.)

Figure 218.

2.In the Add New Application for Port Forwarding section of the screen, specify information in the following fields:

•IP Address. The IP address of an internal server or host computer that a remote user has access to.

•TCP Port. The TCP port number of the application that is accessed through the SSL VPN tunnel. The following table lists some commonly used TCP applications and port numbers.

Virtual Private Networking Using SSL Connections

363