NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual 375, Resource Objects to Simplify Policies on

ProSecure Unified Threat Management (UTM) Appliance

Table 97. Add SSL VPN Policy screen settings (continued)

Setting	Description
Apply	Network	Policy Name	A descriptive name of the SSL VPN policy for identification and
Policy For	Resource		management purposes.
(continued)		Defined	From the drop-down list, select a network resource that you
		Resources	have defined on the Resources screen (see Use Network
			Resource Objects to Simplify Policies on page 369).
		Permission	From the drop-down list, select PERMIT or DENY to specify
			whether the policy permits or denies access.
	IP Address	Policy Name	A descriptive name of the SSL VPN policy for identification and
			management purposes.
		IP Address	The IP address to which the SSL VPN policy is applied.
		Port Range /	A port (fill in the Begin field) or a range of ports (fill in the Begin
		Port Number	and End fields) to which the SSL VPN policy is applied. Ports
			can be 0 through 65535. The policy is applied to all TCP and
			UDP traffic that passes on those ports. Leave the fields blank
			to apply the policy to all traffic.
		Service	From the drop-down list, select the service to which the SSL
			VPN policy is applied:
			• VPN Tunnel. The policy is applied only to a VPN tunnel.
			• Port Forwarding. The policy is applied only to port
			forwarding.
			• All. The policy is applied both to a VPN tunnel and to port
			forwarding.
		Permission	From the drop-down list, select PERMIT or DENY to specify
			whether the policy permits or denies access.
	IP Network	Policy Name	A descriptive name of the SSL VPN policy for identification and
			management purposes.
		IP Address	The network IP address to which the SSL VPN policy is
			applied.
		Subnet Mask	The network subnet mask to which the SSL VPN policy is
			applied.
		Port Range /	A port (fill in the Begin field) or a range of ports (fill in the Begin
		Port Number	and End fields) to which the SSL VPN policy is applied. Ports
			can be 0 through 65535. The policy is applied to all TCP and
			UDP traffic that passes on those ports. Leave the fields blank
			to apply the policy to all traffic.

Virtual Private Networking Using SSL Connections

375