NETGEAR UTM5EW-100NAS manual View the Vlan Status Screen, Vlan Status screen fields, 498

ProSecure Unified Threat Management (UTM) Appliance

View the VLAN Status Screen

The VLAN Status screen displays information about the VLANs (both enabled and disabled) that are configured on the UTM. For information about configuring VLAN profiles, see Configure a VLAN Profile on page 103. For information about enabling and disabling VLAN profiles, see Assign and Manage VLAN Profiles on page 100.

To view the VLAN Status screen, select Monitoring > System Status > VLAN Status. The VLAN Status screen displays. (The following figure shows the VLAN Status screen of the UTM50.)

Figure 288.

The following table explains the fields of the VLAN Status screen:

Table 128. VLAN Status screen fields

Item	Description
Profile Name	The unique name for the VLAN that you have assigned on the Add VLAN Profile screen
	(see Configure a VLAN Profile on page 103).
VLAN ID	The identifier for the VLAN that you have assigned on the Add VLAN Profile screen (see
	Configure a VLAN Profile on page 103).
MAC Address	VLANs can have the same MAC address as the associated LAN port or can be assigned
	a unique MAC address, depending on the selection that you have made on the LAN
	Advanced screen (see Configure VLAN MAC Addresses and Advanced LAN Settings on
	page 108). If a VLAN is configured but disabled, the MAC address displays as
	00:00:00:00:00:00.
Subnet IP	The IP address and subnet mask that you have assigned on the Add VLAN Profile screen
	(see Configure a VLAN Profile on page 103).
DHCP Status	The DHCP status for the VLAN, which can be either DHCP Enabled or DHCP Disabled,
	depending on the DHCP configuration that you have specified on the Add VLAN Profile
	screen (see Configure a VLAN Profile on page 103).
Port Membership	The ports that you have associated with the VLAN on the Add VLAN Profile screen (see
	Configure a VLAN Profile on page 103).

Monitor System Access and Performance

498