NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Activity Description LAN ports, Dmz Led, WAN ports

ProSecure Unified Threat Management (UTM) Appliance

Table 2. LED descriptions UTM5, UTM10, UTM25, UTM50, and UTM150 (continued)

LED	Activity	Description
LAN ports
Left LED	Off	The LAN port has no link.
	On (green)	The LAN port has detected a link with a connected Ethernet device.
	Blinking (green)	Data is transmitted or received by the LAN port.
Right LED	Off	The LAN port is operating at 10 Mbps.
	On (amber)	The LAN port is operating at 100 Mbps.
	On (green)	The LAN port is operating at 1000 Mbps.
DMZ LED	Off	Port 4 (UTM5, UTM9S, UTM10, UTM25, and UTM150) or port 6 (UTM50) is
		operating as a normal LAN port.
	On (green)	Port 4 (UTM5, UTM9S, UTM10, UTM25, and UTM150) or port 6 (UTM50) is
		operating as a dedicated hardware DMZ port.
WAN ports
Left LED	Off	The WAN port has no physical link, that is, no Ethernet cable is plugged into
		the UTM.
	On (green)	The WAN port has a valid connection with a device that provides an Internet
		connection.
	Blinking (green)	Data is transmitted or received by the WAN port.
Right LED	Off	The WAN port is operating at 10 Mbps.
	On (amber)	The WAN port is operating at 100 Mbps.
	On (green)	The WAN port is operating at 1000 Mbps.
Active LED	Off	The WAN port either is not enabled or has no link to the Internet.
(multiple
	On (green)	The WAN port has a valid Internet connection.
WAN port
models only)

Introduction

31