NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual 672

ProSecure Unified Threat Management (UTM) Appliance

Table 193. UTM default configuration settings (continued)

Feature

Default behavior

Wireless radio and access point settings (UTM9S and UTM25S only)

Wireless radio	Enabled
Region	Nonconfigurable: set for the region in
	which you purchased the UTM.
Country	The selection is limited to the countries in
	the region in which you purchased the
	UTM. The default settings are:
	• Africa. Algeria
	• Asia. Azerbaijan
	• Europe. Albania
	• Middle East. Bahrain
	• North America, Latin America, and The
	Caribbean. United States
	• Oceania. Australia
Operating frequency	2.4 GHz or 5 GHz
Default security profile	netgear-1
Default network name (SSID)	UTM9S or UTM25S
Broadcast SSID	Enabled
Security	Open
Encryption	None
Authentication	None
Default transmit power	Full
802.11 wireless mode	g and b (for most countries)
802.11b/g/n radio frequency channel	Auto
802.11n channel spacing	20 MHz
Beacon interval	100 ms
DTIM interval	2
RTS threshold	2346 bytes
Fragmentation threshold	2346 bytes
Preamble mode	Long
Protection mode	None
Power save	Disabled

Default Settings and Technical Specifications

672