Panasonic DMR-EZ49VEB manual System Settings

System Settings

F
C	>	Others	>	Setup
U
N
T
O
N
M
E
N
U

(> 66, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

Others

3, 4 select “Others” > 1 > 3, 4 select item > OK

Setup	Remote Control	DVD 1
Tuning	Clock
	Owner ID
Disc
	Standby Settings
Picture
	System Update
Sound
	Initialize
Display
Connection	SELECT
VHS
	TAB
Others	RETURN
Remote Control (> 82)
[DVD 1]		[DVD 2]	[DVD 3]

Clock (> 14)

Owner ID (> 13)

In order to prevent another person from using this unit if it is stolen, you can set a PIN number and input your personal information. Once the PIN number has been set, you cannot return to the factory preset. Make sure not to forget this.

≥PIN number ≥Name ≥House No. ≥Postcode

Standby Settings

≥Press [OK] to show the following settings.

Power Save in Standby

[On]	It will go into the Power Save in Standby mode
	when the unit is in standby mode.
[On Timer]	“Power Save in Standby” is set to activate
	during the setting time period. (> below)
[Off]	It is possible to start quickly from the standby
	mode. (Quick Start mode)

1Press [3, 4] to select “On Timer” and press [OK].

Power Save in Standby

			Power Save			On Timer
			From	0	:00	To	6	:00
Number
			Saves standby power consumption
0	9
			by disabling Quick Start function and
CHANGE			AV2 loop-through in standby.
		SELECT	Press OK to manually set the period of
OK	RETURN		Power Save.

2Press [3, 4] to set the start time (hour).

3Press [2, 1] to select the stop time and press [3, 4] to set the stop time (hour).

4Press [OK] when you have finished the settings.

≥You can also use the numbered buttons for setting. ≥You can set start and stop time by the hour.

≥If the clock has not been set, “Power Save in Standby” is activated at all hours.

Auto Standby

Set the time to automatically turn the unit off.

After the unit has finished operating, the unit will be turned off once the set time has passed.

[30 minutes]	[1 hour]	[2 hours]	[4 hours]
[6 hours]
[Off]	The unit will not automatically turn off.

Auto Standby after OTR

[On] This unit is turned to standby mode when this unit is not operated for approximately 5 minutes after completing One Touch Recording (> 29).

[Off]

Auto Standby after Copy

[On]	This unit is turned to standby mode when this unit is not
	operated for approximately 5 minutes after completing
	copy (> 57-61).
[Off]

RF OUT ( Aerial Signal )

[On]	Broadcast signals are output from this unit.
	TV can receive broadcast signals even if this unit is in
	standby mode when connecting TV with this unit using
	the RF cable (> 10).
[Off]	Press [2, 1] to select “Yes” when the confirmation
	message is displayed.
	Broadcast signals are not output from this unit to reduce
	standby power consumption.
	≥Power consumption is lowered additionally when
	“Power Save in Standby” is activated.
	≥If this unit turns into standby mode when connecting TV
	with this unit using the RF cable, proper broadcast
	images do not appear on TV.

72

VQT2J51