System Update, TV Guide Download in Standby

System Update

In order to update this unit, the TV Guide download, and support system changes made by broadcasts, this unit periodically performs software updates.

≥Press [OK] to show the following settings.

≥Update data and TV Guide download information are sent by an unscheduled digital broadcast. In order to receive these updates, you must be able to receive digital broadcasts.

≥An update will take approximately 60 minutes. While the update is in progress, “SW-DL” appears on the unit’s display.

You cannot operate the unit until the update is complete. Removing the AC mains lead while the update is in progress may damage the unit.

≥TV Guide download will take approximately 30 minutes.

While the TV Guide download is in progress, “GUIDE” appears on the unit’s display. The TV Guide download can be interrupted by switching on the unit.

≥To avoid hearing the startup sound of System Update for the unit, perform the following steps.

–Select the time for Software Update (> below, TV Guide/Software search period).

–Set “TV Guide Download in Standby” and “Software Update in Standby” (> below) to “Off”, and update manually (> below, Software Update Search Now).

TV Guide Download in Standby

[On]	When the unit is turned off, TV Guide data is downloaded
	automatically.
[Off]

Software Update in Standby

[On]	You can perform the unit updates automatically when the
	unit is turned off.
[Off]

TV Guide/Software search period

Selects the time to automatically perform TV Guide download and updates when the unit is turned off. This can only be set when “TV Guide Download in Standby” or “Software Update in Standby” is set to “On”.

≥If there is a programmed recording set for the time you have selected, the programmed recording will be given priority.

When the GUIDE Plus+ system is not available

[Automatic]	The unit will give priority to searching for update
	data at midnight.
[02:00–06:00]	[06:00–10:00]	[10:00–14:00]
[14:00–18:00]	[18:00–22:00]	[22:00–02:00]

When the GUIDE Plus+ system is available

[Automatic]

[Daytime] Updating is executed during daytime (06:00– 22:00).

Software Update Search Now

Start the search for new software manually.

A new software version is announced by a message. Do not turn this unit off during the update. This could result in the loss of data. A message shows that the update has finished.

≥If applicable update data is found, press [2, 1] to select “Yes”, then press [OK].

GUIDE Plus+ System Information

You can check the condition of GUIDE Plus+ system of this unit.

Post Code

You can input the postal code which is necessary to download area specific information of GUIDE Plus+ system.

Initialize

≥Press [OK] to show the following settings.

Shipping Condition

This returns Setup menus to default settings, except for the ratings level, ratings PIN, Slideshow Settings, Owner ID and clock settings, etc.

[Yes] [No]

≥The timer recording programmes are also cancelled.

Default Settings

This returns Setup menus to default settings, except for the tuning settings, clock settings, disc language settings, ratings level, ratings PIN, Slideshow Settings, Owner ID and remote control code, etc.