Panasonic DMR-EZ49VEB manual Recording from an External Device

Recording from an External Device

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]

≥Turn off the unit and other video equipment before connecting. ≥Refer to “Adding a VCR: Connecting to a Television and a Video

Cassette Recorder” when connecting to the AV2 input terminals on the rear panel. (> 75)

Recording to DVD

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]

Perform steps 1 - 3 (> left).

IN 2 S VIDEO VIDEO L /MONO AUDIO R

This unit

AV3 IN S VIDEO VIDEO L /MONO AUDIO R

S Video
cable§1	Audio/video cable§2

Other video equipment

Connect to Audio/Video output terminals.

§1 You can get a sharper, clearer picture by connecting with an S Video cable instead of the yellow video cable.

§2 Connect to terminals of the same colour.

≥If the audio output of the external device is monaural, connect to L/ MONO on the AV3 input terminals at the front.

Preparation:

≥Turn on the unit.

≥[RAM] If the disc is protected, release protection (> 64).

≥[VHS] Ensure accidental erasure tab is intact.

≥When the output signal from the external device is NTSC, change the “TV System” to “NTSC” in the Setup menu (> 70).

This unit cannot record NTSC signals to discs that already have PAL signal recordings.

≥To reduce noise in input from an external device, set “Copy NR” to “On” in the on-screen display (> 63).

1 DRIVE to select the DVD or VHS

SELECT

drive.

–Insert a disc or video cassette with enough remaining blank space (> 7).

2REC MODE

to select the recording mode (> 28).

3	INPUT	to select the input where
	SELECT

your external device is connected.

– Front panel inputs are AV3.

32

4Start play on the external device.

5 REC

at the point you want to start recording to the disc.

Recording to VHS

[VHS]

Perform steps 1 - 3 (> left).

4PLAY

to bring the tape to the point at which you want to start recording from.

5 PAUSE when you reach that point.

6REC

to put the unit in recording standby.

7Start play on the external device.

8PAUSE

to start recording at the point you desire.

Tips

To skip unwanted parts

Press [;] to pause recording. (Press again to restart recording.)

To stop recording

Press [∫].

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]

≥Using Flexible Recording (> 30), you can record the content of a video cassette (approx. 1–8 hours) to a 4.7 GB disc with the best possible quality of recording without wasting disc space.

Notes

≥When timer recording starts while recording from an external device, timer recording takes priority and recording from the external device stops.

≥If video is copied from another piece of equipment to this unit, then the video quality will be degraded.

≥Almost all videos and DVD-Video on sale have been treated to prevent illegal copying. Any software that has been so treated cannot be recorded using this unit.

VQT2J51