Panasonic DMR-EZ49VEB manual On the TV

On the Unit’s Display (Continued)

F74

F75

U59

U61

U76

U80, U81, U99

U88

X HOLD

≥The HDMI connection could not be authenticated due to a transfer malfunction. If you have another HDMI cable, try to use it. If it remains displayed, consult the dealer where the unit was purchased.

≥The HDMI connection could not be authenticated due to an internal data malfunction. If you have another HDMI cable, try to use it. If it remains displayed, consult the dealer where the unit was purchased.

≥The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear of the unit.

≥(When a disc is not inserted) Displays when a malfunction has occurred. This is displayed when the unit is in the recovery process to return to normal operation. Once the display disappears you can use the unit again.

If it remains displayed, consult the dealer where the unit was purchased.

≥HDMI cannot be output because this unit is connected to a model that does not support copyright protection.

≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. Press [Í/I] on the main unit again to turn the unit on.

≥There was something unusual detected with the disc while recording, playing or copying; there was a power failure or the AC mains lead was disconnected while the unit was on. The unit is carrying out its recovery process. This process restores the unit to normal operation. Wait until the message disappears.

If it remains displayed, consult the dealer where the unit was purchased.

≥The Child Lock function is activated.

Press and hold [OK] and [RETURN ] at the same time until “X HOLD” disappears. (> 74)

On the TV

Cannot finish recording completely.	≥ The programme was copy-protected.
Copy-protect signal was detected.
Disc is full, or maximum number of titles	≥ The disc may be full.
are recorded.	≥ The maximum number of title has been exceeded. (> 28)
Cannot finish recording completely.	≥ [RAM] [-RW‹V›] [+RW] Create space by erasing unwanted titles.
	Even if you erase recorded content from the DVD-R, DVD-R DL, +R or +R DL
Cannot record.
	there is no increase in disc space. Available recording space on a DVD-RW
Maximum number of titles exceeded.
	(DVD-Video format) or +RW disc increases when the last title is deleted (space
	may increase slightly when you delete other titles). (> 26, 50, 64)
	≥ Use a new disc.
No cassette.	≥ There is no video cassette in the tape deck when playing or recording TV
	programmes. Insert a video cassette. (> 7)
The cassette is write-protected.	≥ A video cassette without a secure accidental erasure prevention tab is inserted
	when recording programmes. Use a video cassette with a secure accidental
	erasure prevention tab. (> 7)
Cannot playback.	≥ You tried to play a title recorded using a different encoding system from that of
TV system is different from the setting.	the TV system currently selected on the unit.
To playback, please change the TV System	Alter the “TV System” setting on this unit to suit. (> 70)
in Setup.
Cannot play on this unit.	≥ You tried to play a non-compatible image. (> 18)
No Disc	≥ The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
	≥ Ensure the disc is flat in the tray.
Now recording on DVD.	≥ The VHS plays back while recording on DVD. You can watch the VHS playback
To watch pictures on VHS, use AV1 socket,	by connecting 21-pin Scart cable from AV1 on the unit to the television.
and switch to an appropriate AV channel	VHS cannot be output via “DVD priority out” while recording to DVD. (> 75)
on your TV.
This is a non-recordable disc.	≥ The disc may be dirty or scratched. (> 7)
	≥ The unit cannot record on the disc you inserted. Insert a DVD-RAM or
Unable to format.
	unfinalised DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, R DL or
This disc is not formatted properly.	+RW disc. (> 15)
Format it using DVD Management	≥ You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW disc.
in FUNCTION MENU.	Format the disc with the unit. (> 64)
$	≥ The operation is prohibited by the unit, disc or video cassette.

81

VQT2J51