Panasonic DMR-EZ49VEB manual VHS Settings

AV1 Output

Set according to the terminal of the connected TV.

[Video]

Select when a TV that can receive a composite signal is connected.

[RGB 1]

Select when a TV that can receive an RGB signal is connected. If you always would like to view the picture from the unit in RGB signal, select this mode. The TV screen will automatically switch to display the picture from the unit when the unit is turned on.

[RGB 2]

Select when a TV that can receive an RGB signal is connected. If you would like to switch to display the picture from the unit only when playback or viewing menus, select this mode.

≥If this unit is connected with an HDMI cable, you cannot select “RGB 1” or “RGB 2”.

AV2 Settings

Set to match the connected equipment.

≥Press [OK] to show the following settings.

AV2 Input

Set to “RGB / Video” or “RGB” when receiving or recording RGB output from external equipment.

[RGB / Video] The unit automatically detects whether the input signal from the AV2 terminal is an RGB signal or other signals and makes settings.

[RGB]

[Video] [S Video]

Ext Link

[Ext Link 1] When this unit is connected to a digital satellite receiver with a 21-spin Scart cable and this unit receives a control signal.

Start and stop timings of recording are controlled by the control signal.

[Ext Link 2] When external equipment with a timer function is connected.

Recording is continued while the image signal is being sent to the unit from the external equipment. Recording is stopped when the image signal is halted by turning the external equipment off.

§1 Depending on the connected equipment, some items may be shaded in grey on the display and cannot be selected, or you may not be able to change the settings.

§2 Choose the setting to suit your TV and preference.

VHS Settings

F	>		>
C		Others		Setup
U
N
T
O
N
M
E
N
U

(> 66, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

VHS

3, 4 select “VHS” > 1 > 3, 4 select item >

OK

Setup	Tape Length	Auto (E-240)
Tuning	SQPB	Automatic
Disc
Picture
Sound
Display
Connection		SELECT
VHS	TAB
Others		RETURN

Tape Length

Set the length of the tape you are using so the unit can show the correct remaining time.

[Auto (E-240)]	The unit automatically distinguishes E30, -60, -90,
	-120, -180, and -240 tapes.
[E-195]	For E195 tape
[E-260]	For E260 tape
[E-300]	For E300 tape

SQPB

To play back video cassettes recorded in S-VHS format (SQPB; S- VHS Quasi Playback)

[Automatic]	This unit automatically detects the format in which
	the recording was made and selects the same format
	for playback. However, picture distortion may occur.
	Therefore, set to “On” or “Off”.
[On]	Use this setting when playing back a cassette tape
	recorded in the S-VHS format.
[Off]	Use this setting when playing back a cassette tape
	recorded in the VHS format only.

71

VQT2J51