Panasonic DMR-EZ49VEB manual Sound and Display Settings

Sound and Display Settings

F	>		>
C		Others		Setup
U
N
T
O
N
M
E
N
U

(> 66, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

Sound

Audio Mode for XP Recording

Choose the audio type when recording or copying with XP mode. [Dolby Digital] (> 92) [LPCM] (> 92)

≥The picture quality of LPCM recordings may be lower than that of normal XP mode recordings.

≥The audio recording becomes Dolby Digital even if you selected LPCM when using a recording mode other than XP.

§Incorrect settings can cause noise to be output which can be harmful to your ears and speakers, and audio will not be recorded properly on media such as mini discs.

Refer to the operating instructions for connected devices to verify whether or not they can decode each of the audio formats.

3, 4 select “Sound” > 1 > 3, 4 select item > OK

Setup	Dynamic Range Compression		Off
Tuning	Digital Audio Output
	Audio Mode for XP Recording		Dolby Digital
Disc
Picture
Sound
Display
Connection
VHS	TAB	SELECT
Others		RETURN

Dynamic Range Compression

[DVD-V](Dolby Digital only)

Change the dynamic range (> 92) for easier listening in low volume.

Display

3, 4 select “Display” > 1 > 3, 4 select item >

Setup
	On-Screen Messages	5 sec.
Tuning	Unit’s Display	Bright
	New Channel Message	Automatic
Disc
	Screen Saver	On
Picture
	FUNCTION MENU Display	Off
Sound
Display
Connection	SELECT
VHS
	TAB
Others	RETURN

On-Screen Messages

OK

Digital Audio Output

Change the settings when you have connected equipment through the unit’s Digital Audio Out terminal (> 76).

Press [OK] to show the following settings.

PCM Down Conversion

Select how to output audio with a sampling frequency of 96kHz. Signals are converted to 48 kHz despite the above settings if the signals have a sampling frequency of over 96 kHz, or the disc has copy protection.

[On]	Signals are converted to 48 kHz. (Choose when the
	connected equipment cannot process signals with sampling
	frequency of 96 kHz.)
[Off]	Signals are output as 96 kHz. (Choose when the connected
	equipment can process signals with sampling frequency of
	96 kHz.)

Dolby Digital§

Choose whether to output by “Bitstream”, which processes Dolby Digital signals on other connected equipment, or to convert the signals to “PCM” (2ch) on the unit before output.

[Bitstream]	When connected to equipment with a built-in Dolby
	Digital decoder.
[PCM]	When connected to equipment without a built-in Dolby
	Digital decoder.

DTS§

Choose whether to output by “Bitstream”, which processes DTS signals on other connected equipment or to convert the signals to “PCM” (2ch) on the unit before output.

[Bitstream]	When connected to equipment with a built-in DTS
	decoder.
[PCM]	When connected to equipment without a built-in DTS
	decoder.

MPEG§

Choose whether to output by “Bitstream”, which processes MPEG audio signals on other connected equipment or to convert the signals to “PCM” (2ch) on the unit before output.

[Bitstream]	When connected to equipment with a built-in MPEG
	decoder.
[PCM]	When connected to equipment without a built-in
	MPEG decoder.

Choose the approximate time until the digital channel information screen (> 48) disappears automatically.

The length of time the Control Panel (> 47) is displayed can also be changed, but “Off” does not work.

[Off]	The digital channel information is not displayed.
[3 sec.]	[5 sec.]	[7 sec.]	[10 sec.]

Unit’s Display

Changes the brightness of the unit’s display.

Regardless of the setting, when “Power Save in Standby” (> 72) is activated and this unit is turned off, the unit’s display is turned off.

[Bright][Dim]

New Channel Message

Set whether to display the confirmation message when a DVB channel is added.

[Automatic]	When a new DVB channel is added the unit will be
	informed automatically.
[Off]	The Channel Messages are not shown.

Screen Saver

[On]	When this unit is not operated for approximately 5 minutes
	while the screen is being displayed, the screen saver is
	displayed. To return to the previous screen, press [OK].
[Off]

FUNCTION MENU Display

[On]	When the unit is turned on, the FUNCTION MENU will be
	displayed. (> 45)
[Off]

69

VQT2J51