Panasonic DMR-EZ49VEB manual Basic Connection, Connecting to a Television only, This unit

Basic Connection

Use of the RF coaxial cable

≥Keep the RF coaxial cables as far away as possible from other cables.

≥Do not roll up the RF coaxial cables.

Using a fully wired 21-pin Scart cable

–You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (> 46).

–You can enjoy high-quality viewing by connecting the unit to an RGB compatible television. “AV1 Output” in the Setup menu is set to “RGB 1” or “RGB 2” (> 71)

Make “AV2 Input” settings in the Setup menu (> 71)

≥Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.

BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3.

Connecting to a Television only

	This unit
HDMI			RF IN
AV OUT
			RF OUT
		AV1(TV)

1

To the aerial

HDMI cable		3		2	The RF coaxial cable
					cannot be used for
You can enjoy high-quality picture by					showing pictures from
adding the HDMI cable connection > 12					the unit. The unit must
					be connected using
					another method, e.g.
					21-pin Scart cable
					to show pictures
	HDMI IN		AV	RF IN	from the unit on the
					television set.

TV

1Aerial cable to the “RF IN” on the unit.

2RF coaxial cable (included) from the “RF OUT” on the unit to the

3 21-pin Scart cable from the “AV1 (TV)” on the unit to the “AV” on

“RF IN” on the TV. the TV.

21-pin Scart terminal

1 3 5 7 9 11 13 15 17 19

21

2 4 6 8 10 12 14 16 18 20

10

VQT2J51