Panasonic DMR-EZ49VEB manual Additional Connections

Refere nce

Additional Connections

Using a fully wired 21-pin Scart cable

–You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (> 46).

–You can enjoy high-quality viewing by connecting the unit to an RGB compatible television. “AV1 Output” in the Setup menu is set to “RGB 1” or “RGB 2” (> 71).

Make “AV2 Input” settings in the Setup menu (> 71).

Use of the RF coaxial cable

≥Keep the RF coaxial cables as far away as possible from other cables.

≥Do not roll up the RF coaxial cables.

DVD output and DVD/VHS output

The unit has DVD/VHS common out terminals and DVD priority out terminals.

≥ The DVD priority out terminals can also output the VHS signal.	DVD/VHS common out
However this is not possible during DVD recording or DVD timer recording.
	RF
	IN
	RF
OPTICAL	OUT

DIGITAL AUDIO OUT	R-AUDIO-L	VIDEO
(PCM/BITSTREAM)	OUT	AV2 (EXT)	AV1 (TV)

DVD priority out

≥Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.

Connect AC mains lead only after all other connections are complete.

BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3.

Adding a VCR: Connecting to a Television and a Video Cassette Recorder

RF coaxial cable

21-pin Scart cable

HDMI cable

You can enjoy high-quality picture by adding the HDMI cable connection (> 12)

TV

AV

HDMI IN RF IN

To the aerial

This unit

HDMI AV			RF IN
OUT
			RF OUT
	AV2 (EXT)	AV1(TV)

		RF IN
		RF OUT
	AV		The RF coaxial cable (included)
			cannot be used for showing
VCR			pictures from the unit. The unit
			must be connected using another
			method, e.g. 21-pin Scart cable to
			show pictures from the unit
			on the television set.

To record from a VCR

Refer to “Recording from an External Device” (> 32).

75

VQT2J51