16
Purge the hose to eliminate cleaning solution from
the tube by spraying clean water through the hose
without attachments into a sink for 15-30 seconds.
Attach Scotchgard post-applicator cartridge to the
Applicator Tool, following the instructions on the
cartridge. Attach the combined Tool/Cartridge to
the hose. The water from the 2-in-1 Tank will
automatically mix with the concentrated Scotchgard
post-treatment formula contained in the cartridge.
Turn the Custom Clean Dial to the
Rinse/Protect setting.
Before applying Scotchgard protector to a large
area, test in a small, hidden area for colorfastness.
Examine area when dry. If color is affected, do not
use. For use on upholstery, look for manufacturer’s
cleanability code tag. Use only on fabrics coded
“W” or “WS”. If coded “S” or “X”, do not use. Not
recommended for use on velvet, silk vinyl, leather,
or 100% cotton upholstery.
Apply Scotchgard protector in a slow sweeping
motion with a slight overlap of the treated area. For
best coverage, follow the guide on the cartridge.
One 8 oz. cartridge protects 200 square feet
(18.6 sq. meters). This is equal to two average
size rooms, (each at 10 x 10 ft. or 3 x 3 meters).
Periodically check the level in the bottle to
ensure the best coverage.
Be careful not to spray the protector onto furniture
or fabric that has not been tested for colorfastness.
If this does occur, wipe off the protector.
Remove the bottle from the spraying applicator tool.
If concentrate is left, replace the cap to the cartridge
and store at room temperature for later use.
With the applicator tool still on the end of the
hose, spray clean hot water into the sink to avoid
any future clogging.
Store tool in a convenient location for use the
next time.
Post-Treatment Scotchgard Protector (Optional)
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
2
13
Tip:If clogged, soak
applicator tool
in hot tap water
before using.