167
Special Features of Your BISSELL ProHeat 2X
Your BISSELL ProHeat 2X Deep Cleaner is a home
cleaning system that uses the power of heat and
brushes to get the deep down dirt for a maximum
clean. Not only does it come with a lot of unique
features, it has been designed with you, the customer,
in mind.
BISSELL ProHeat models all feature a patented built-in
heater which will heat the hot tap water you put in up
to 25 degrees hotter to safely optimize cleaning
effectiveness. The heater will never allow the
temperature to exceed 190 degrees. The Heater switch
on the front of the machine controls the heater so you
have the option to turn off the heat if you are cleaning
delicate wool or oriental rugs.
The 2 DirtLifter PowerBrush rolls are designed to
enhance cleaning performance. The bristle pattern safely
lifts out the deep down dirt while gently grooming carpet
fibers. The floating suspension self-adjusts to all carpet
heights and protects your carpet if you leave the power
switch ON ( I ). Once the product is in the Upright
position, the brushes automatically stop spinning. The
Detent Pedal will activate the brush when floor cleaning.
The Custom Clean feature automatically mixes hot tap
water with the BISSELL formula. Simply choose one
of the 4 settings (Heavy Traffic, Normal Clean, Light
Clean, or Rinse) and the ProHeat 2X will adjust the right
amount of cleaning solution to mix with the heated
water to fit your cleaning need.
Having a separate solution tank from the water tank
also allows no waste of formula. Because the water
and solution are stored separately, they are not mixed
until you are ready to clean. When your cleaning job is
finished, the formula can be stored ready to use in your
machine for the next time!
This feature is available on all ProHeat 2X models, either
on top of the Water Tank or on the Upper Handle.

Built-in Heater Feature

Custom Clean™

Dual DirtLifter PowerBrush