GS108T Smart Switch Software Administration Manual

.

Figure 4-3

2.From the LAG ID drop-down list, select 1 or 2.

3.Click Unit 1. A screen similar to the following displays.

Figure 4-4

4.Select up to four ports for membership in the LAG by selecting the check boxes below the port numbers.

5.Click Apply to confirm any settings changes.

Advanced—LAG Configuration

The Advanced LAG Configuration screen is identical to the Basic LAG Configuration screen. See “Basic—LAG Configuration” on page 4-4.

Advanced—LAG Membership

The Advanced LAG Membership screen is identical to the Basic LAG Membership screen. See “Basic—LAG Membership” on page 4-5.

4-6

Configuring Switching

v1.0, December 2007

Page 50
Image 50
NETGEAR GS108T-100NAS manual Advanced-LAG Configuration, Advanced-LAG Membership