GS108T Smart Switch Software Administration Manual
2.Under Logs Configuration, the following fields are displayed. All fields are configurable:
•Logging. Specifies whether RAM and flash logging is enabled on the device. Select one of the following radio buttons:
–Enable. Specifies that RAM and flash logging is enabled.
–Disable. Specifies that RAM and flash logging is disabled.
•RAM. Select the check box to set the severity levels for RAM.
•Flash. Select the check box to set the severity levels for RAM.
•Emergency. Specifies whether emergency messages are logged. Select one of the following values from the
–On. Specifies that emergency messages are logged.
–Off. Specifies that emergency messages are not logged.
•Alert. Specifies whether alerts are logged. Select one of the following values from the
–On. Specifies that alerts are logged.
–Off. Specifies that alerts are not logged.
•Critical. Specifies whether critical messages are logged. Select one of the following values from the
–On. Specifies that critical messages are logged.
–Off. Specifies that critical messages are not logged.
•Error. Specifies whether error messages are logged. Select one of the following values from the
–On. Specifies that error messages are logged.
–Off. Specifies that error messages are not logged.
•Warning. Specifies whether warnings are logged. Select one of the following values from the
–On. Specifies that warnings are logged.
–Off. Specifies that warnings are not logged.
•Notice. Specifies whether notifications are logged. Select one of the following values from the
–On. Specifies that notifications are logged.
–Off. Specifies that notifications are not logged.
Monitoring, Maintenance, and Help |
