GS108T Smart Switch Software Administration Manual
To delete a static multicast ID:
a.Select the check box to the left of the static multicast ID that you want to remove.
b.Click Delete.
To change a Layer 2 multicast address:
a.Select the VID of the static multicast ID that you want to change.
b.Enter the new Layer 2 multicast address.
c.Click Apply.
Multicast Group Membership
To configure members for a multicast group:
1.Select Switching > Multicast > Multicast Group Membership. A screen similar to the following displays.
Figure
2.From the ID
You can either assign all ports to or remove them from the static group in step 3, or assign individual ports to or remove them from the static multicast group in step 4. These steps are mutually exclusive.
3.To assign all ports to or remove them from the static multicast group, select the check box to the left of Unit 1.
4.To assign individual ports to or remove them from the static multicast group: a. Click Unit 1. A screen similar to the following displays.
Configuring Switching |
