NETGEAR GS108T-100NAS manual Advanced-LLDP Configuration, Advanced-LLDP Port Settings

GS108T Smart Switch Software Administration Manual

•Notification Interval (5–3600 sec). The interval at which notifications are generated when remote MSAP information changes. The default value is 5 seconds.

•Fast Start Count (2–10). The number of successive LLDP frame transmissions for one complete fast-start interval. The default value is 4.

5.Click Apply to confirm any settings changes.

Advanced—LLDP Configuration

The Advanced LLDP Configuration screen is identical to the Basic LLDP Configuration screen. See the previous section.

Advanced—LLDP Port Settings

When LDDP is enabled, you can view the LLDP port settings in the LDDP Port Settings screen:

1.Select System > LLDP > Advanced > LLDP Port Settings. A screen similar to the following

displays.

.

Figure 3-6

2.You can make changes to the LLDP settings for an individual port, for a group of ports, or for all ports simultaneously:

•To change the LLDP settings for an individual port, select the check box to the left of its port number, and then select the LLDP port settings.

Managing System Settings 3-9

v1.0, December 2007