NETGEAR GS108T-100NAS manual Advanced-Port Pvid Configuration

GS108T Smart Switch Software Administration Manual

Figure 4-12

b.To assign a port to or remove it from the VLAN, select the check box under an individual port number.

5.Click Apply to confirm any settings changes.

Note: When the port-based VLAN type is configured, an ingress (incoming) packet with an IEEE 802.1Q tag is ignored and preserved.

Advanced—Port PVID Configuration

The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface. There are certain requirements for a PVID:

•All ports must have a defined PVID.

•If no other value is specified, the default VLAN PVID is used.

•If you want to change the port’s default PVID, you must first create a VLAN group that includes the port.

Configuring Switching 4-15

v1.0, December 2007