GS108T Smart Switch Software Administration Manual
.
Figure
2.You can make changes to the bandwidth limits for an individual port, for a group of ports, or for all ports simultaneously:
•To change the bandwidth limits for an individual port, select the check box to the left of its port number, and then select bandwidth limits.
Note: You can also enter the interface number (that is, the port number) in the GO TO INTERFACE field, and then click GO.
•To change the bandwidth limits for a group of ports, select the check boxes to the left of their port numbers, and then select the bandwidth limits.
•To change the bandwidth limits for all ports simultaneously, select the check box at the top of the column of check boxes, and then select the bandwidth limits.
The following port configuration information is displayed. All fields are configurable:
•Port. Specifies the port number.
•Ingress Rate. Specifies the rate limitation of incoming traffic in this port. The possible values in bits per second (bps) are:
–512K bps, 2M bps, 4M bbps, 10M bps, 20M bps, 40M bps, 60M bps, 100M bps, 200M bps, 400M bps, and 1000M bps.
Configuring QoS and Security |
