GS108T Smart Switch Software Administration Manual

Port Security

The Port Security screen lets you to configure port learning for unknown source MAC address packets. If the learning mode is disabled, you can specify an action that must be taken for unknown source MAC address packets. To configure port security:

1.Select Security > Traffic Control > Port Security. A screen similar to the following displays.

.

Figure 5-12

2.You can make changes to the port security setting for an individual port, for a group of ports, or for all ports simultaneously:

To change the port security setting for an individual port, select the check box to the left of its port number, and then select the learning mode and action.

Note: You can also enter the interface number (that is, the port number) in the GO TO INTERFACE field, and then click GO.

To change the port security setting for a group of ports, select the check boxes to the left of their port numbers, and then select the learning mode and action.

To change the port security setting for all ports simultaneously, select the check box at the top of the column of check boxes, and then select the learning mode and action.

5-18

Configuring QoS and Security

v1.0, December 2007

Page 90
Image 90
NETGEAR GS108T-100NAS manual Port Security