GS108T Smart Switch Software Administration Manual

Password Change

You can set a new password of up to 20 ASCII characters.

1.Click Password Change in the Switch Setting section. The Password Change screen displays. You can set a new password.

2.Enter the old password.

3.Enter the new password, and enter is again to confirm it.

4.Click Set to enable the new password.

Firmware Upgrade

.

Note: You can also upgrade the firmware using the File Download screen of the switch (see “File Download” on page 6-20).

If you click Firmware Upgrade in the main screen (see Figure 1-1 on page 1-3), after you have selected the switch to upgrade, the following screen displays:

.

Figure 1-6

1-8

Getting Started with Switch Management

v1.0, December 2007

Page 22
Image 22
NETGEAR GS108T-100NAS manual Password Change, Firmware Upgrade