NETGEAR GS108T-100NAS - page 60

GS108T Smart Switch Software Administration Manual
4-16 Configuring Switching
v1.0, December 2007
To configure PVIDs:
1. Select Switching > VLAN > Advanced > Port PVID Configuration. A screen similar to the
following displays.
2. You can make changes to the port PVID settings for an individual port or for a group of ports:
• To change the port PVID setting for an individual port, select the check box to the left of
its port number, and then enter an existing VLAN ID in the PVID field.
• To change the port PVID settings for a group of ports, select the check boxes to the left of
their port numbers, and then enter an existing VLAN ID in the PVID fields.
The following information about the port PVID settings is displayed:
•PVID. Specifies the ID of an existing VLAN.
3. Click Apply to confirm any settings changes.
Figure 4-13
Note: You can also enter the interface number (that is, the port number) in the GO
TO INTERFACE field, and then click GO.