GS108T Smart Switch Software Administration Manual

Multicast Entry. Shows the Layer 2 group multicast address.

Port Members. Shows the membership that is associated with the group.

5.Click Apply to confirm any settings changes.

Static Multicasting

Static multicast addressing provides a way to add or delete static multicast addresses that are related to a VLAN. To configure static multicasting:

1.Select Switching > Multicast > Static Multicasting. A screen similar to the following displays.

Figure 4-18

2.The following information about static multicasting is displayed. Both the VID and Multicast Entry fields are configurable:

ID. Shows the static multicast ID.

VID. Specifies the VLAN ID (VID). Select an existing VID from the drop-down list.

Multicast Entry. Specifies the Layer 2 multicast address. Enter a multicast address in the 01:00:5E:XX:XX:XX format.

3.Perform one of the following actions:

To add a multicast entry:

a.Select a VID.

b.Enter the Layer 2 multicast address.

c.Click Add.

4-22

Configuring Switching

v1.0, December 2007

Page 66
Image 66
NETGEAR GS108T-100NAS manual Static Multicasting