Electrolux 50870 Installation instructions, Fitting under a counter kitchen worktop or sink

Models: 50870

1 48
Download 48 pages 29.19 Kb
Page 34
Image 34
Installation instructions

34Installation

Installation instructions

Installation

WARNING!

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter (kitchen worktop or sink)

By removing the machine's worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

1. Remove the machine's worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

2.Insert the machine after adjusting the levelling with the adjustable feet.

Page 34
Image 34
Electrolux 50870 user manual Installation instructions, Fitting under a counter kitchen worktop or sink, Proceed as follows