26Unloading the dishwasher
WARNING!
Interrupt or cancel a washing programme in progress ONLY if it's absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully.
Interrupt a washing programme in progress:
•Open the dishwasher door; the programme will stop. Close the door; the pro- gramme will start from the point at which it was interrupted.
•Press the On/Off button, all lights will turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted.
End of the washing programme
•The dishwasher will automatically stop.
•The end of programme indicator light will illuminate.
•The light of the programme just ended will remain on.
•In the digital display appears a zero.
1.Switch off the dishwasher by pressing the On/Off button.
2.Open the dishwasher's door, leave it ajar and wait a few minutes before re- moving the dishes; in this way they will be cooler and the drying will be improved.
Unloading the dishwasher
•Hot dishes are sensitive to knocks.
The dishes should therefore be allowed to cool down before removing from the appliance.
•Empty the lower basket first and then the upper one; this will avoid water drip- ping from the upper basket onto the dishes in the lower one.
•Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.
CAUTION!
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
