![If the drying results are not satisfactory we suggest that you:](/images/new-backgrounds/200816/20081645x1.webp)
Use of detergent 23
If the drying results are not satisfactory we suggest that you:
1.Fill up the rinse aid dispenser with rinse aid.
2.Activate the rinse aid dispenser.
3.Set the rinse aid dosage to position 2.
•The activation/deactivation of the rinse aid dispenser can only be possible with the
Activation/deactivation of the rinse aid dispenser
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing.
3.Press button B, the lights of buttons A and C turn off while the light of button
B goes on flashing. The digital display indicates the current setting: = Rinse aid dispenser deactivated.
4.To change the setting, press button B again, the digital display indicates the
new setting: = Rinse aid dispenser activated.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.
If you decide to turn back to the use of standard detergent system we advise that you:
1.Deactivate the
2.Fill up the salt container and the rinse aid dispenser again.
3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.
4.Adjust the water hardness setting according to the hardness of the water in your area.
5.Adjust the rinse aid dosage.