NETGEAR GS108T-100NAS - page 92

GS108T Smart Switch Software Administration Manual
5-20 Configuring QoS and Security
v1.0, December 2007
2. The following fields are displayed. Except for the ID field, all fields are configurable:
•ID. Shows the identifier for the IP access list.
•IP Address. Specifies the IP address for the IP access list.
•Subnet Mask. Specifies the subnet mask for the IP access list.
3. Perform one of the following actions:
To add an IP access list:
a. Enter an IP address.
b. Enter a subnet mask.
c. Click Add.
To delete an IP access list:
a. Select the check box to the left of the ID for the IP access list that you want to remove.
b. Click Delete.
To change the subnet mask for an IP access list:
a. Select the check box to the left of the ID for the IP access list that you want to change.
b. Change the subnet mask.
c. Click Apply.
Figure 5-13