SECTION 10—ANTI-TIPPERS/WHEEL LOCKS

DETAIL “A” - HAND ACTIVATED WHEEL LOCK

Socket

Rear Wheel

Screws

 

Wheel lock shoe embedded into rear wheel tire at least 3/16-inch

12-inch

Rear

Wheel

Wheel Lock

20, 22,

24-inch Rear

Wheel

DETAIL “B” - FOOT ACTIVATED WHEEL LOCK

Wheel lock shoe embedded into rear wheel tire at least 3/16-inch

Wheel Lock

Rear Wheel

FIGURE 10.4 Adjusting the Wheel Lock

Installing Anti-Tippers

NOTE: For this procedure, refer to FIGURE 10.5.

NOTE: A 1/2‐inch clearance between the bottom of the anti‐tipper wheels and the floor MUST be maintained at all times

1. Remove the anti‐tippers from accessory carton.

WARNING

Anti-tippers MUST be fully engaged and release buttons fully protruding out of adjustment holes.

2.Press the release buttons in and insert the anti‐tippers into the rear frame tubing until the buttons lock in place.

Anti-Tipper

Release

Button

Wheelchair

Frame

FIGURE 10.5 Installing Anti-Tippers

Orbit

68

Part No. 1073955

Page 68
Image 68
Invacare 1073955 manual Installing Anti-Tippers, Adjusting the Wheel Lock