Invacare 1073955 - page 66

SECTION 10—ANTI-TIPPERS/WHEEL LOCKS
Orbit™66 Part No. 1073955
FIGURE 10.1 Foot Activated Wheel Lock Procedures
Hand Activated Wheel Lock Procedures
Installing/Removing Hand Activated Wheel Locks
NOTE:Forthisprocedure,refertoFIGURE 10.3onpage67.
1. Removethefootactivatedwheellock.
RefertoInstalling/RemovingFoot
ActivatedWheelLocksonpage 65.
2. Dooneofthefollowing:
•For12‐inchRearWheels:Position 
thewheellockassemblyonthe
LOWERtubeoftheframe.
•For20,22,or24‐inchRearWheels:
Position thewheellockassemblyon
theuppertubeofframe.
3. Looselytightenthetwosocketscrews
thatsecurethewheellockstothe
wheelchairframe.
4. Adjustthewheellocks.Referto
AdjustingtheWheelLockonpage 67.
5. Toremovethewheellocks,unthread
thesocketscrewsandremovewheel
lockfromthewheelchairframe. FIGURE 10.2 Installing/Removing Hand
Activated Wheel Locks
Set Screws
Wheel Lock
Clamp
Wheelchair
Frame Wheel Lock
Clamp
Crossbar
Lower Tube of
Wheelchair
Frame
Vertical Tube
Release
Lever
Slider
Bar
Foot Activated
Wheel Lock
Assembly
NOTE:AportionoftheReleaseLeveriscut
awaytoshowabetterviewofthesliderbar.
12-inch Rear
Wheel
20, 22, 24-inch
Rear Wheel
Socket
Screws
Hand
Activated
Wheel
Lock
Lower Tube
of Frame
Upper Tube
of Frame