Invacare 1073955 manual Adjusting the Back Height Recliner Models Only

SECTION 11—RECLINER

Headrest Upholstery

Headrest

Extension

Phillips

Screws

Back Cane	Back
	Upholstery

FIGURE 11.4 Replacing Upholstery (Recliner Models Only)

Adjusting the Back Height - Recliner Models Only

NOTE: For this procedure, refer to FIGURE 11.5.

1.If necessary, remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 61.

2.Remove the two mounting screws and locknuts that secure the seat adjustment plates to the seat rail. Repeat for opposite side.

3.Refer to FIGURE 11.5 to determine the seat adjustment plate mounting position for the corresponding seat cushion height.

4.Position the seat adjustment plates on the seat rails at the position determined in STEP 3.

5.Secure the seat adjustment plates to the seat rail with the two existing mounting screws. Repeat for opposite side.

6.Securely tighten mounting screws.

7.If necessary, reinstall the rear wheels. Refer to Removing/Installing Rear Wheels on page 61.

2-inch Seat
Cushion Position	Locknuts

3-inch Seat

Cushion Position

Mounting
Screws	Washers

FIGURE 11.5 Adjusting the Back Height - Recliner Models Only

Part No. 1073955 75 Orbit™