Invacare 1073955 - page 28

SECTION 4—ASSEMBLY
Orbit™28 Part No. 1073955
 WARNING
The locking pins MUST be protruding past the top of the seat plate assembly for a
positive lock.
Keep locking pins clean.
10. Pushinonthetipofthequick‐releasepinandreinstallintheseat/baseframeplate
assembly.SeeDetailʺAʺofFIGURE4.1.
11. Pulldownonquick‐releasepintoensurepositivelock.
NOTE:Ifaseatingsystemisbeingusedonthewheelchair,refertotheseatingsystemOwnerʹs
Manualforinstallationandremovaloftheseatingsystem.
12. Installtheseatingsystemontothewheelchair,ifsoequipped.
Disassembling the Seat Frame from the Base Frame
 WARNING
Invacare recommends that the wheelchair users NOT be transported in vehicles of
any kind while in wheelchairs. As of this date, the Department of Transportation has
not approved any tie-down systems for transportation of a user while in a wheelchair,
in a moving vehicle of any type.
1. Ifnecessary,returnthewheelchairto0°tilt.RefertoEngagingTilt‐In‐Spaceon
page 70.
2. Removeoccupantfromwheelchair.
3. Pulldownandturnplungerslocatedonundersideofbaseframeplate.SeeDetailʺAʺ
ofFIGURE 4.1.
4. Pushinonthetipofthequickreleasepinlocatedonundersideofbaseframeplateand
pulloutofseat/baseframeplateassembly.SeeDetailʺAʺofFIGURE4.1.
5. Todisengagetheseatframefromthebaseframe,push/pulltheseatframeforward.
NOTE:Ifaseatingsystemisbeingusedonthewheelchair,refertotheseatingsystemOwnerʹs
Manualforinstallationandremovaloftheseatingsystem.
6. Ifsoequipped,removetheexistingseatingsystemfromthewheelchair.
7. Ifsoequipped,foldcantileverarms.RefertoUsing/Installing/AdjustingCantilever
Armsonpage 48.
8. Ifsoequipped,removetheT‐arms.RefertoInstalling/RemovingtheT‐armson
page 42.
9. Folddownthebackcanes.RefertoFolding/UnfoldingtheBackCanesonpage 56.
10. Removerearwheels.RefertoRemoving/InstallingRearWheelsonpage 61.