Invacare 1073955 manual Adjusting the Transfer Assists and/or Side Guards

SECTION 6—ARMS

	Mounting Screws
Optional Locking Pins	(STEPS 2,7)
(STEP 3)
Wheelchair Frame	Washers
	(STEPS 2,7)
	T-Arm Clamp
T-Arm Socket	DETAIL “A”

DETAIL “B”

T-Arm

T-Arm
Socket	*Mounting Screws
Locking Lever	and Washers
	(STEP 4)
(STEP 8)

FIGURE 6.6 Adjusting the T-Arms- Adjusting T-Arm Sockets

Adjusting the Transfer Assists and/or Side Guards

NOTE: For this procedure, refer to FIGURE 6.7 on page 47.

1.Remove the T‐arm from the wheelchair. Refer to Installing/Removing the T‐arms on page 42.

2.Remove the two bottom mounting screws that secure the side guard to the bottom clamp.

3.Perform one of the following:

•Small Side Guards ‐ Move the bottom clamp up one of two mounting positions in the side guard.

•Large Side Guards ‐ Move the bottom clamp up one of three mounting positions in the side guard.

Orbit™ 46 Part No. 1073955