SECTION 10—ANTI-TIPPERS/WHEEL LOCKS

Adjusting Anti-Tippers

NOTE: For this procedure, refer to FIGURE 10.6.

NOTE: The anti‐tippers must maintain a 1‐1/2 to 2‐inch clearance between the bottom of the anti‐tipper wheels and the floor.

1.Depress the release button on the wheeled portion of the anti‐tipper and slide it up/down to achieve the 1‐1/2 to 2‐inch clearance.

WARNING

Anti-tippers MUST be fully engaged and release buttons fully protruding out of adjustment holes.

2.Check to make sure that the release buttons are fully engaged in adjustment holes and 1‐1/2 to 2‐inch clearance is maintained.

Wheelchair Frame

Anti-Tipper

Release

Button

Choose one of three positions to maintain 1-1/2 to 2-inch clearance

FIGURE 10.6 Adjusting Anti-Tippers

Part No. 1073955

69

Orbit

Page 69
Image 69
Invacare 1073955 manual Adjusting Anti-Tippers