SECTION 5—FRONT RIGGINGS

Seat Rail

Locknut

 

Telescoping

Tube

Mounting

Screw

FIGURE 5.13 Installing/Removing/Adjusting the Telescoping Front Frame Tubes

Optional Footrest Accessories

Replacing Heel Loop

Composite Footplates

NOTE: For this procedure, refer to FIGURE 5.14.

1.Remove the mounting screw and coved washer that secures the lower footrest assembly to the swingaway footrest assembly.

2.Remove the lower footrest assembly.

3.Remove the mounting screws and locknuts that secure the heel loop to the footrest.

4.Slide existing heel loop up and off slide tube.

5.Slide new heel loop onto slide tube.

6.Reverse STEPS 1‐4 to reassemble.

NOTE: When securing the heel loop to the footrest assembly, tighten the phillips screw and locknut until the spacer is secure.

Swingaway Footrest

Assembly

Mounting screw/

 

Coved Washer

Mounting Screw

 

Slide

Spacer

Tube

 

 

Heel Loop

 

Footplate

Lower Footrest

Locknut

Assembly

 

FIGURE 5.14 Replacing Heel Loop - Composite Footplates

Part No. 1073955

39

Orbit

Page 39
Image 39
Invacare 1073955 manual Optional Footrest Accessories, Replacing Heel Loop, Composite Footplates