TYPICAL PRODUCT PARAMETERS
TYPICAL PRODUCT PARAMETERS
|
| ORBIT | |
|
|
|
|
| MINIMUM |
| MAXIMUM |
|
|
|
|
OVERALL WIDTH: | 18.5 inches |
| 24.5 inches |
|
|
|
|
OVERALL DEPTH |
|
|
|
(WITHOUT FRONT RIGGINGS) |
|
|
|
SHORT FRAME: | 35 inches |
| 38 inches |
LONG FRAME: | 39 inches |
| 42 inches |
|
|
| |
SEAT WIDTH: | |||
|
| ||
SEAT DEPTH: | |||
|
| ||
FRAME TYPE: | Aluminum, | ||
|
| ||
|
| ||
BACK STYLE: | Adjustable Angle (80° to 110°), Fold Down Reclining back | ||
| with stroller handles (Available on long frames only), | ||
| Fixed Height Anodized Cane with Push Handles | ||
|
|
| |
BACK HEIGHT: |
| 20 inches | |
|
|
| |
BACK ANGLE (RECLINER ONLY): |
| 90° to 170° | |
|
| ||
ARM STYLES: | “T” (Standard), Cantilever (Fixed Hgt. Anodized Cane with | ||
| Push Handles Only) or Dual Point (Adjustable Height) | ||
|
| ||
FOOTREST: | Swingaways Footrests and Elevating Legrests | ||
|
| ||
REAR AXLE: | Permanent or Quick Release | ||
|
|
| |
REAR AXLE MOUNTING PLATES: |
| ||
|
| ||
REAR WHEELS: | 12, 20, 22 and 24 inch Composite Pneumatic or | ||
| |||
|
| ||
HANDRIMS: | Aluminum, Plastic Coated and Projection | ||
|
| ||
CASTER SIZE: | 5 inch Aluminum or Composite Urethane, 6 or 8 inch | ||
| Composite Urethane, Pneumatic or Pneumatic with | ||
|
| Flat Free Insert | |
|
| ||
WHEEL LOCKS: | |||
|
| Foot Activated | |
|
| ||
WEIGHT: | 32 lbs without front riggings | ||
|
|
| |
SHIPPING WEIGHT** (APPROX.): |
| 45 lbs | |
|
|
|
|
*NOTE: Invacare recommends that rear seat‐to‐floor height be at least 3/8 inch shorter than front seat‐to‐floor height. Otherwise a forward seat dump can occur. The rear seat‐to‐floor heights are based on pneumatic tires or pneumatic tires with flat free inserts. If wheelchair is equipped with urethane tires, subtract 1/4 inch from the measurements listed above. All heights are approximate to ± 1/4 inch due to tire wear and air pressure. The front seat‐to‐floor heights are approximate to ± 1/4 inch.
**NOTE: Weights vary depending on how wheelchair is equipped.
