SECTION
❑Inspect handrims for signs of rough edges or peeling.
❑Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑Ensure wheel bearings are clean and free of moisture.
❑Check headtube locknuts for tightness.
❑Inspect casters for cracks and wear.
❑Inspect front casters for cracked, bent or broken spokes.
❑Clean upholstery and armrests.
❑Check that all labels are present and legible. Replace if necessary.
❑Ensure casters are free of debris.
❑Make sure detent balls of the quick‐release pin are fully released before operating the wheelchair.
❑The detent balls MUST be protruding past the top of the seat plate assembly for a positive lock.
❑Keep detent balls clean.
Inspect/Adjust Weekly
❑Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑Inspect tires for flat spots and wear.
❑Check pneumatic tires for proper inflation.
❑Inspect rear wheels for cracked, bent or broken spokes.
❑Ensure all spokes are uniformly tight.
❑Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑Inspect front caster for cracked, bent or broken spokes.
❑Ensure casters are free of debris.
❑Make sure detent balls of the quick‐release pin are fully released before operating the wheelchair.
❑The detent balls MUST be protruding past the top of the seat plate assembly for a positive lock.
❑Keep detent balls clean.
Inspect/Adjust Monthly
❑Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑Check that the wheel locks do not interfere with tires when rolling.
