Invacare 1073955 manual Replacing Heel Loop Adjustable Footplate

SECTION 5—FRONT RIGGINGS

Adjustable Footplate

NOTE: For this procedure, refer to FIGURE 5.15.

1.Remove the four mounting screws and washers that secure the existing heel loop to the footplate.

2.Position the mounting holes of the new heel loop with the mounting holes in the adjustable footplate.

3.Secure the new heel loop to the footplate with the four mounting screws and washers.

Mounting Screws

Washer

Heel Mounting

Loop Screws

Footplate

FIGURE 5.15 Replacing Heel Loop - Adjustable Footplate

Orbit™ 40 Part No. 1073955