Canon WUX10 manual Keylock, This locks the remote control keys, This retrieves the key lock state

Projector WUX10 MarkII User Commands

KEYLOCK

Keylock setting

Format

KEYLOCK=<Key lock setting parameters:ID>

GET□KEYLOCK / ?△KEYLOCK

<Key lock setting parameters:ID>

OFF	No locking (OFF)
MAIN	Main key lock
RC	Remote control key lock

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET KEYLOCK' or '?KEYLOCK', current keylocking setting is returned as

'g:KEYLOCK=<Key lock setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1)This command is used to lock the keys so as to restrict the operations performed using the remote control or main unit.

(2)This command functions in the same way as when "System setting" - "Key lock" are selected on the menu.

(3)This command will not affect the emulation function (remote control or main unit commands) even if the main unit or remote control keys are locked.

(4)The current key lock setting can be acquired using the applicable GET command. ("GET KEYLOCK")

Example

Setting		This locks the remote control keys.
> KEYLOCK=RC
<	i:OK
Reference		This retrieves the key lock state.
>	GET KEYLOCK or ?KEYLOCK

<g:KEYLOCK=OFF

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 44 -