Pentax 16826 Setting the Blink Detection Function, Use the four-way controller 23 to select Blink

• When the sensitivity is set to 3200 or 6400, the number of recorded pixels is fixed at f (2592×1944).

•When set to 9(Green) or C (Movie) mode, only AUTO (sensitivity 80 - 800) is available.

•When set to c(Digital SR) mode, only AUTO (sensitivity 80 - 6400) is available.

•When set to S (Fireworks) mode, the sensitivity is fixed at its minimum setting.

•If you change the [Sensitivity] setting frequently, you can save time by assigning it to the Green button (p.121).

Saving the Sensitivity setting 1p.129

Setting the Blink Detection Function

This specifies whether the Blink Detection function works when the Face Detection function is activated. The default setting is O (On).

1
	Press the 3 button in A mode.
2	The [A Rec. Mode] menu appears.
	Use the four-way controller (23) to select [Blink
3	Detection].
	Use the four-way controller (45)	Rec. Mode	2/3
	to select O or P.	Movie
	O Blink Detection function works.	D-Range Setting
		Shake Reduction CCD-Shift
	P Blink Detection function does not
		Blink Detection
	work.	Digital Zoom
		Instant Review
	The setting is saved.
		MENU Exit

4 Press the 3 button.

The camera returns to capture status.

Blink Detection 1p.69

3 TakingPictures

115