Pentax RZ10, 16841, 16826, 16811, 16861 manual Troubleshooting, Problem Cause Remedy, 228

9 Appendix

Troubleshooting

Problem	Cause	Remedy
	The battery is not	Check if a battery is installed. If not,
	installed	install a battery.
The camera will	The battery is installed	Check orientation of the battery. Reinsert
		the battery with the label facing the
not turn on	incorrectly	display (p.32).
	The battery is	Charge the battery.
	exhausted
	The camera is	The display is off when the camera is
	connected to a
No image appears		connected to a computer.
	computer
on the display
	The camera is	The display is off when the camera is
	connected to a TV	connected to a TV.
	The brightness level of	Adjust the brightness level in [Brightness
	the display is set too	Level] in the [W Setting] menu (p.199).
	dark
		When the Power Saving function is
The display is		activated, the display automatically
		darkens after a certain amount of time.
hard to see
	Power Saving function	Press a button to return to the normal
	is activated	brightness level.
		Select [Off] in [Power Saving] in the
		[W Setting] menu to turn the Power
		Saving function off (p.200).
		Pictures cannot be taken while the flash
	The flash is charging	is charging. Wait until charging is
		finished.
The shutter will	There is no available	Insert an SD Memory Card with available
not release	space on the SD
		space or delete unwanted images (p.37,
	Memory Card or in the
		p.146).
	built-in memory
	Recording	Wait until recording is finished.
The picture is dark	The subject is too far	The picture becomes dark if the subject is
	away in a dark
when using the	environment, such as	too far away. Take pictures within the
flash		specified flash range.
	a night scene

228