Pentax 16861, RZ10, 16841, 16826 Setting the AE Metering, To Set the White Balance Manually, 112

In the [White Balance] screen, use the four-way controller (23) to select K (Manual).

To Set the White Balance Manually

Have a blank sheet of white paper or similar material ready.

3 Taking

1

2 Point the camera at the blank sheet of paper or other material so that it fills the frame displayed in the center of the screen.

White Balance

SHUTTER Adjust

MENU Cancel OK OK

Pictures

3 Press the shutter release button fully. The white balance is automatically adjusted.

4 Press the 4 button.

The setting is saved and the [A Rec. Mode] menu reappears.

5 Press the 3 button.

The camera returns to capture status.

Setting the AE Metering

You can set the area of the screen where the brightness is metered to determine the exposure.

	Multi-segment		The camera divides the image into 256 areas, meters the
L metering			brightness and determines the exposure.
	Center-weighted		The camera takes a reading of the overall brightness of the
			picture with the center of the image having more influence
M metering
			on the exposure.
N Spot AE metering			The camera determines the exposure by metering the
			brightness only at the center of the image.
1
		Press the 3 button in A mode.
		The [A Rec. Mode] menu appears.

112