Murphy Comprehensive Guide to Centurion Configuration and C3-3 Display Settings

6.0Using the C3-3 Display to View and Configure the Centurion Controller Settings

The Murphy C3-3 Display module is a highly integrated opera- tor interface specially programmed to complement and sup- port Centurion controller. The primary purpose of C3-3 Display is to display operational and configuration parameters and provide access to modify the configuration parameters stored in the Centurion controller.

6.1Features

•Power

–10 - 32 VDC (LED active indication)

–Storage power able to withstand 12V crank

•Package and Design

–Same 5 x 5 design as annunciators

–12 key keypad

•Familiar annunciator keys

•Easy navigation keys

–128 x 64 graphic backlit display

–Configurable using PC Software

–Field Upgradeable (flash bootloader)

•Communications

–LED active indication for each port

–RS232/485 (Modbus Master)

–RS232/485/USB 1.1 Compliant Port

•Download Configuration/Monitoring

•Approvals

–Approvals for CSA, CLASS 1, DIVISION 2, Groups B, C and D are pending.

6.1.1Keypad Description and Navigation

	COOLER TEMPERATURE		105° F		The keypad for the C3-3 Display has 12 keys. The
		LOW ENGINE OIL LEVEL			following table generally describes the keys and
	REMOTE	▼▲	0000.3H		their function for each of the three screen types:
	WARMUP		B2 TIME-140
					• Operating status screens
		ESC			• Setup screens (Password required)
Fn
		ACK			• Edit screens (Password required)
					Many of the keys have a modified action relative to
HOME		SETUP			the current location of the cursor and the current
					page being displayed.
		ENTER
RESET		RUN	TEST	TIMER
		STOP			“0”

CE-05171N page 15 of 44